Wolf Cinema TXF-2500
5,000 ANSI DLP® home theatre projector. Enjoy ultra-bright, bold and colourful imagery from today’s latest SD, HD and UHD/4K sources with Wolf Cinema’s latest high-performance projection system, model TXF-2500. Boasting 5,000 ANSI of peak white performance and deep contrast levels, this system can cast razor-sharp images on screens as large as 16-ft [4.9 meters] in width!
- Next-gen DLP® chip technology for enhanced 4K imaging (3840X 2160) from all SD, HD and Ultra HD/4K sources
- 5,000 ANSI peak white, ~8,000:1 CR performance (Dynamic Black enabled)
- Gen4 V4K™ engine for enhanced 4K viewing (up to 4096 X 2160) from all SD, HD and Ultra HD sources
- HDR10 enabled for extended dynamic range with UHD/4K sources
- Extended range primary optics: 1.35 – 2.65:1 TD
- Ample V+H lens shift capabilities (+/-80% V x SH,+/- 20% H x SW)
- Extensive I/O source connectivity including HDMI 2.0/2.2, Display Port and VGA inputs, HDMI output
- Long life UHP lamp – up to 3000 hrs [Eco mode]
- Factory hand-calibrated for imaging excellence
- Quiet design: 32dB @ 1 meter (Eco mode)
- Optional 4K/UHD Wolf Cinema ProScaler video processor for superior imaging performance.
- E- VariScope™ available in optional ProScaler for 2.35:1 film widescreen viewing on constant height screens (no anamorphic lens required)
- IR remote included plus RS-232, RJ-45, 12V trigger port and optional wired remote control capabilities
- Elegant all-metal cabinet with optimized thermal design for extended projector and lamp life
- Optional WC-PM-LS ceiling mount assembly
WC-PS-04 ProScaler MKIV Video Processor
WC-PM-M Projector Ceiling Mount Kit
WC-LPU265 265W Lamp Assembly
Extended Range Optics, 1.35 – 2.65:1 TD
TXF-2500
| Display Technology | Single 0.66 DLP® UHD/4K Imaging Technology by Texas Instruments™ |
| Resolution | 3840 x 2160 |
| Illumination | 3500/1500 Hours (Eco/Bright) 370W P-VIP, part number WC-TXF25L-370 |
| Performance | 5,000 ANSI peak white, ~8,000:1 CR performance (Dynamic Black enabled) |
| Noise Levels | 32dB SPL (Eco mode), 39 dB SPL (Normal) |
| Color Wheel | 6 Segment RGBRGB |
| Inputs/Outputs | 2 x HDMI (HDMI 2 Support HDCP 2.2), 1 x VGA (D-Sub 15pin) (Computer In), 1 x Display Port, 1x HDMI out, 1 x USB type A (Power/Service) |
| Signals | Video: SDTV 480i/p, 576i/p, HDTV 720p (50/60Hz), 1080i (50/60Hz), 1080p (50/60Hz), UHD 2160p (24/50/60Hz)Computer: VGA, SVGA, XGA, HDTV (720P), WXGA, WXGA (3), WXGA+, SXGA, UXGA, HDTV (1080p), WUXGA, UHD |
| E-VariScope™ | Multiple aspect ratio control – ex: 1.78:1, 1.85:1, 2.20:1, 2.35:1, 2.40:1 etc. aspect ratio control via optional Wolf Cinema ProScaler video processor |
| Primary Lens | Extended Range Optics, 1.35 – 2.65:1 TD |
| Lens Offsets | +/- 80% vertical, +/- 20% horizontal |
| Control | IR, RS-232C terminal, RJ-45 LAN terminal, Optional Wired Remote (3.5mm Phone jack), 12V Trigger |
| Power Requirements | IR, RS-232C terminal, RJ-45 LAN terminal, Optional Wired Remote (3.5mm Phone jack), 12V Trigger |
| Power Consumption | tbd |
| Operating Temperature | 41–104°F (5–40°C), 85% max humidity |
| Installation Height | Recommended below 5000ft. (1524m); high altitude mode available up to 10,000 feet (3048 meters) |
| Dimensions (WxHxD) | 21” x 11” x 28” (preliminary) |
| Weight | 56 lbs. (preliminary) |
Optional ProScaler Video Processors
| ProScaler MK IV | HDMI 2.0 inputs (x4), HDCP 2.2 compliant; HDMI 2.0 outputs (x2), 2U rack mountable chassis |
| ProScaler MK VI | HDMI 2.0 inputs (x2), HDCP 2.2 compliant; HDMI 2.0 outputs (x2), 1U rack mountable chassis |
| Video Processing | 10 bit scaling, 4913 point (17 x 17 x 17) CMS advanced filtering, MPEG mosquito noise, block artifact reduction, temporal noise reduction; multiple configuration memories per input |
| Control Terminals | IR, RS-232 |
| Power Requirements | AC 110V-240V 50/60Hz |
| All features, designs and specifications are subject to change without notice. VariScope and E-VariScope are trademarks of Wolf Cinema. DLP is a registered trademark of Texas Instruments. All rights reserved. |
